When you evaluate a high speed CI flexo printing machine for high-margin film and paper work, the build quality of the central drum, the accuracy of the servo drives, the drying capacity, and tooling flexibility matter most. Our Wide web CI flexo printing machine gives you stable registration on substrates up to 1450 mm wide. For converters running pouches, labels, and wrappers, the CI flexo printing machine for flexible packaging is designed to minimize waste during job changeovers. The CI flexo printing machine for plastic film handles BOPP, PET, LDPE, and CPP with low dot gain, while the CI flexo printing machine for paper delivers clean solids and sharp type on coated paper and lightweight board. These configurations share a common platform, so operators can move from one substrate to another without retraining.
The High Speed CI Flexo Printing Machine uses an oversized central impression drum with double-wall construction for thermal stability. Each servo-driven print deck accepts sleeve adapters for quick repeat length changes, and the pre-registration system moves all decks into position before the web is threaded. Closed-loop tension control with load cells keeps the substrate flat through acceleration and deceleration, while the chambered doctor blade system maintains consistent ink density at speeds up to 300 m/min. The bridge design provides easy access to the decks and dryers, and the mobile control console lets the operator adjust register, impression, and drying settings from one position. This configuration is suited to flexible packaging, shrink sleeves, wrappers, and paper-based applications where repeatable color and fast setup are critical.
| Parameter | Specification |
|---|---|
| Maximum web width | 850 / 1050 / 1250 / 1450 mm |
| Maximum mechanical speed | 350 m/min |
| Printing speed range | 200–300 m/min depending on substrate |
| Repeat length range | 300–900 mm |
| Color stations | 8 or 10 |
| Registration accuracy | ±0.1 mm |
| Unwind/rewind diameter | 800 / 1000 mm |
| Substrate thickness | 15–150 µm film; 80–350 gsm paper |
| Drying system | Electric / gas / thermal oil |
| Drive system | Digital AC servo motors with direct drive |
| Control system | Siemens PLC with 15-inch touchscreen HMI |
| Ink supply | Chambered doctor blade with automatic viscosity control option |
| Compressed air requirement | 6–8 bar, oil-free |
| Total installed power | 120–180 kW depending on configuration |
| Machine dimensions (L × W × H) | Approx. 12.5 m × 4.2 m × 3.6 m for 8-color model |
